Longevity of the Roof is very important as it protects the building, us and our valuable contents. But unfortunately the Roof only gets our attention when it is damaged.While a roof’s main objective is to protect and weatherproof the house, but it has a valuable impact on the style and appearance of your home. There is a wide variety of roofing materials available, suitable for both Roof replacement and re-roofing of existing homes. The type of roof material you choose will depend on several factors, including the home’s architectural style and your personal preference and budget.

In this blog EPDM Coatings will guide you to the six most popular residential roofing materials for the perfect roof for your home.

1. Asphalt Shingles

Asphalt shingles are the most popular roofing option around the US as over 75 percent of homes in the U.S. are covered with asphalt roofing. Why it is so? Because it is affordable, installs quickly, comes in several colors, surprisingly durable, and many brands carry warranties up to 40 years.

There are two basic varieties of asphalt shingles: organic-based shingles and fiberglass-based ones. The organic type is less expensive and easily available. But Fiberglass-reinforced shingles last longer, are lighter in weight, and more fire resistant. You can buy good-bad versions of both kinds whereas price is the indicator of quality.

2. Cedar Roofing

Although cedar roofing is comparatively expensive and difficult to install but no other roofing material matches the natural beauty and distinctive texture of western red cedar.The one major drawback of any wood roof, of course, is that it offers very little resistance to fire, unless it’s treated with a fire retardant.

The two major types of cedar roofing material are shingles and shakes.Shingles are thinner, smoother, and more uniform while Shakes are thicker and rougher. A cedar shingle roof has a smart, elegant appearance with clean lines, a low profile and are available in various grades.

A shake roof is more rustic and robust-looking. Its surface has a lot of character and deep shadow lines and come in four premium grades. 

3. Metal Roofing

Metal roofing has gained immense popularity in recent years. Metal roofing looks great on a variety of home styles, ranging from New England colonials to Carolina coastal cottages.

Why metal roofing is making gains across the US:

• Extremely durable
• Recyclable
• Installs quickly
• Comes in several colors
• Easily sheds snow and ice

A typical metal roof is comprised of long, overlapping panels that extend from the roof peak down to the eaves. The metal panels are often made of aluminum, steel, zinc, or copper.In a corrugated metal roof, the screw heads are exposed. There’s also a new generation of interlocking metal panels that resemble wood shingles, slate, and clay tile. Metal roofs should be coated using durable Roof coating e.g. EPDM Liquid Rubber, so that that their factory finish coating is not compromised.

4. Slate Roofing

While many roofing materials look like slate roofing but no roofing material matches the class of natural slate roofing. Natural slate has benched marked itself as a first-rate roofing material. While introduced in the 1600s it is still used in the US today.

Slate roofing is:

• Extremely durable,
• Fireproof, mildew-resistant,
• Lasts 100 years

Slate roofing is expensive, difficult to install and adds additional weight to the Roof. Before installing slate roofing it’s important to first hire a building engineer to inspect the roof framing to ensure it can support the added weight of the slate.

5. Clay and Concrete Tiles

Clay and concrete tiles are most often seen on Spanish- or Mediterranean-style homes. Clay and concrete tiles come molded in various shapes and profiles, giving a most unique and striking look to the roof.

Famous for:

• Strong appearance
• Durability
• Fire and wind resistance
• Energy Efficiency

Clay and concrete tiles roofs are often found in hot climates because the thick clay or concrete tiles help keep the homes cooler. Although clay and concrete tiles are expensive, they do have an excellent lifespan, often lasting up to 80 years. Just be aware that clay and concrete tiles, like slate roofing, is very heavy and the Roof may needs reinforcement. So consult with an engineer beforehand to confirm the roof frame can support the extra weight.

6. Rubber roofing

To help to prevent leaks and create a more impenetrable seal, roofing manufacturers have created roofing materials made of rubber or PVC plastic commonly referred to as rubber roofing.Single-ply rubber roofing membrane is ideal for use over low-sloping or flat roofs because it is #durable, #pliable, and #waterproof. Whether Rubber roofing is made from synthetic rubber polymers or are made from plastic polymers, rubber roofs are designed to go in places where asphalt shingles don’t perform well.

Rubber roofing has many benefits, including the following:

• Long lifespan of 20-25 years on average.

• Easy cleaning and maintenance.

• Energy savings.

• Improved curb appeal.

• Relatively easy & short installation time.

To purchase best in class Roof coatings for your Roof visit https://www.epdmcoatings.com/. EPDM Liquid Rubber can be applied to various substrates without needing a primer https://www.epdmcoatings.com/epdm-uses.php

EPDM rubber never disappoints. Whether you are reroofing your business or residential building or creating a fish pond, EPDM is the material of choice. EPDM Liquid Rubber is very easy to apply, creates a water-tight seal when cured and offer a host of benefits. However, there are few tips to make most out of the EPDM roofing material.

EPDM Rubber Installation Tips

Use the Right Tools:

The two most commonly used tools for applying EPDM Liquid Rubber are paint rollers and sprayers. Rollers allow you to have an even coat across the roof with ease. We recommend longer handles for much easier use. Sprayers are convenient to cover large roof surfaces and for hard to reach areas where rollers or paint brushes not work smoothly.

One Coat Is Enough:

If you’ve spent much time painting walls and roofs, then you’re probably thinking that EPDM Liquid Rubber will also need more than one coat in order to tolerate weathering and to look good. With EPDM Liquid Rubber a single coat is more than enough. Too many coats will put excess weight on your roof and will affect its curing time.

Waterproof: 

Ordinary roof coatings require to be fully cured before they become waterproof but that’s not the case with EPDM Liquid Rubber. EPDM Liquid Rubber is water-proof after few minutes of application  but will take a week to become fully cured under optimal temperatures and humidity.

Extend the Lifespan

Even the most toughest and durable coating like EPDM Liquid Rubber will wear out if not maintained properly. Here are few tips that will help you extend its lifespan.

Maintain It:

You need to inspect the roof coating twice a year. Look for signs of possible leaks and damages. In addition to visual inspection, you also need to remove debris and clean the roof as any debris lying on the roof can form dams that cause water to back up, and can foster mold and mildew growth. Most of the major repairs can be done by applying a single coat of EPDM Liquid Rubber.

Flashing and Edging:

During visual inspection pay close attention to flashing and edges; if they are damaged or     loosenit could lead to damage of the rubber coating.If it is essential to replace edging or flashing, make sure that the membrane is turned down over the fascia with the metal cover installed over the top.

Conclusion:

EPDM Liquid Rubber is a very versatile and durable material with a very wide range of application from commercial roof application to waterproofing in basements. Also, it is very economical, durable and readily available. The tips provided above will help you maximize the lifespan of your rubber application, and prevent leaks that might damage the roof under the rubber coating.

Need a professional guide to how to mix and apply liquid rubber visit https://www.epdmcoatings.com/application.php

Adhere To A Liquid Rubber Roof Coating, And You’ll See The Benefits!

Dealing with a leaking roof is a road towards endless repairs and if you’re running a business under a leaking roof it can certainly put you out of business. But the good news is that if you have a flat or low slopped roof you certainly stop leaks in its tracks before you have to perform larger scale repairs. The best way to do this is by Liquid Rubber Roof application. How to get most out of your Liquid Rubber application? Let’s see…

Where to Get Started

With liquid roofing materials like Liquid Rubber you have plenty of options. You can opt for a sprayer application which is suitable to cover large areas or you can opt for roll-on option which is good for hard to reach areas and generally, a roll-on application will be sufficient for most people’s needs.

Before you apply Liquid Rubber you first have to clean the roof to give it a nice scrub. Any dirt, grit, or grime that is not cleaned would cause the liquid rubber roof not to adhere completely to the roof. Once cleaned, you can get to work applying the first coat.

Applying the Right Amount

One of the cool things about Liquid Rubber that you can apply multiple coats and what’s more cooler is that you don’t have to. Liquid Rubber is a one coat solution for your roof and a single coat is enough to perfectly cover your roof.  As little as a few milometers of Liquid Rubber is required that will seal your roof for years and prevent further weathering or aging.

Taking Care of Your Own Business

Most roof repair projects require hiring professional to do the job. This is particularly true if your roof is sharply slopped or in- accessible. But the good news is that Liquid Rubber is a true DIY product which you can apply easily on your own without much trouble at all. If you are the DIY home owner and have painted a wall you will see how easy it is to apply Liquid Rubber which requires nothing more than a few paint rollers, brushes, or a sprayer, you’ll be done in no time.

To Conclude

When it comes to roofing, durability, quality and longevity is that what matters. Before your roof needs repairs, consider applying Liquid Rubber coating to protect it. Liquid Rubber will add years of extra life into your roof and you don’t have to worry about getting a new roof. With right tools e.g. Liquid Rubber at the right amount of time you get peace of mind and able to protect your roof.

Need a professional guide to how to mix and apply liquid rubber visit https://www.epdmcoatings.com/application.php

Material Review: What should you know about applying EPDM Liquid Rubber the right way…?

A lot of work goes in maintaining a commercial roof so that it can work perfectly. But most building owners are unaware of how to keep their investment in good shape. A commercial building can have a roof which can come in many forms. If the roof is flat then chances are bright that the roof is made up of EPDM rubber. The best way to protect the rubber roof is by applying a rubber roof coating EPDM Liquid Rubber. EPDM rubber roof applications are not easy and require a number of essentials to be made.

Cleaning the Roof is Essential

The first step is to thoroughly clean the roof from dirt, debris and loose material. The flat roof membrane will accumulate dirt and mildew overtime. The roofing professionals that are hired to perform the cleaning work will use a specialized cleaning solution to clean the dirt and debris off of the roof surface. By working on one section of the roof at a time then moving towards the other, the professionals will be able to get the surface clean in no time at all.

Repairing All Damage Present on the Roof

Before applying rubber roof coating the professional have to repair the damage done to the roof. Any holes, punctures and tears should be repaired before applying the rubber roof coating. If you skip this step it will usually lead to issues down the line when the coating begins to wear off. Also if the roof has ponding issues, it should be addressed by applying a liberal amount of sealant to fill in the dip that this type of condition causes.

Rolling the Sealant on

Once all the prep work has been done it’s time to apply the EPDM rubber roof coating. The professionals will have to work on a section at one time getting a thick coating applied and then making their way getting backwards towards the other section. The last thing as a building owner needs to avoid is to try and apply this coating on their own. Trying to do a DIY EPDM rubber roof coating job will usually end in mistakes that can cause long-term roof problems for a commercial building owner.

If you have any more questions or concerns kindly visit https://www.epdmcoatings.com/blogs/2016/01/the-essentials-of-properly-applying-an-epdm-rubber-roof-coating/

How to make sure your EPDM Liquid Rubber Application goes on successfully each time…!!

EPDM Liquid Rubber is the best way to protect your roof from all kinds of roof problems like leaks, UV-damage and ponding. The best thing about Liquid Rubber is that it is a true DIY product. It means you can apply liquid rubber on your own if you have the time and the DIY inclination to do so. So here are some tips to help you with your Liquid Rubber application.

Right Pair of Tools

Before you start your Liquid Rubber application make sure you have the right kind of tools under your belt. You should have electric drill, a paddle mixer so you can mix up the liquid and the catalyst, and a roller which you normally use for painting. You should have some rags and xylene for cleaning up if you create some mess.

One Coat Is All You Need

Liquid Rubber is a one-coat application system for your roof. One coat is all you need on most surfaces. Apply the first coat evenly and let it dry. Don’t apply the second coat unless it is absolutely necessary. For smooth surfaces you will get 40 square foot of coverage from one gallon and on rough surfaces you will get 30 square foot of coverage. Use this calculation to estimate how much Liquid Rubber you will need to cover the entire area or roof.

Don’t Paint Yourself into a Corner

When applying Liquid Rubber start from the corner and make your way backwards towards the other corner. In this way you will not get struck in the middle and can save some precious time. Always make sure that you have a way to get off the roof as you are painting.

Consider Working with a Specialist

Although you can apply Liquid Rubber on your own by just following the instructions and with right pair of tools but you can also hire some professionals to do the job for you, if you don’t have the time or DIY inclination to do the job. If you realize that you have air bubbles and that the EPDM Liquid Rubber isn’t adhering properly, a professional can help to ease your mind. Also make sure the professional you hire has some previous experience with Liquid Rubber application.

Read more about product, application, technical specs etc. at https://www.epdmcoatings.com/liquid-rubber.php and for detailed application of liquid rubber kindly visit https://www.epdmcoatings.com/blogs/2016/08/tips-for-applying-epdm-liquid-rubber-manually/

Rubber Roof Coatings Material Review- Tips You Need to Know When Repairing Leaks in Your EPDM Roof

Whether you own residential or commercial building, the roof is the most important part of the building. It not only protects you and the interior from Mother Nature’s destructive forces but also helps to hold the building structure together. If you have an EPDM roof you enjoy various benefits, however EPDM roofs are also subject to leaks which are often difficult to locate. So here are the five tips which will help you to identify and repair leaks in your EPDM rubber roof.

1. Start from the Inside

It is easier to spot leaks from the inside than outside. Look at the walls and ceilings for any signs for darker discoloration. Also, if the walls and ceilings have spots on them it means there are leaks.  However, it might not be directly above the area where the discoloration appears because water can take any path.

2. Get Up in the Attic

To find leaks in rubber roof, you will eventually need to get up in your attic. When in the attic, go where you saw the water stains on the ceiling or wall. Use a searchlight to locate water stains on wood or to find wet insulation which can be challenging task.

3. Follow the Trail

Once you have found where water is coming from the next step is to follow the trail to find the actual cause of leak. In some cases it can be a puncture and in some cases it can be damage part of the membrane. Remember water follows the path of the least resistance and runs down the hill.

4. Inspect the Top for Damage

It is very vital to get on the roof and inspect the situation. Getting on the roof is always a dangerous proposition so be careful and ensure your safety first. While on the roof find areas which you believe are center for possible damage like a puncture membrane, missing caulking or a damaged flashing.

5. Use Liquid Rubber for Repairs

Once leaks are identified they can be quickly repaired with EPDM Liquid Rubber coatings. Liquid Rubber is the best sealant available on the market which water-proofs your roof directly upon application and protects the roof from intrusive elements once for all.

If you have any questions or concerns kindly ask at https://www.epdmcoatings.com/qa/questions and to read further about rubber roof coatings visit,https://www.epdmcoatings.com/blogs/2020/02/5-tips-to-help-you-identify-and-repair-roof-leaks-in-rubber-roof-coatings/

DIY Rubber Roof Repair – Learning to Fix Your Roof by Utilizing EPDM Liquid Rubber- “The new Feat in roofing Industry”…!!!

EPDM or Ethylene Propylene Diene Monomer is a specific type of synthetic rubber. It has a long history of success as it has established itself as a versatile rubber with a wide range of applications. EPDM Rubber is simple to install, easy to work with and relatively inexpensive roofing material. When applied it creates water tight seamless membrane. No other ordinary product can match the durability of EPDM Rubber.EPDM Roofing Membranes also have more than 30 years of successful history to their name.

Liquid EPDM “The new Feat in roofing Industry”

Liquid Rubber is a true EPDM product. As in liquid form it can easily repair hard to reach areas of your rubber roof like flashings and protrusions.  Liquid EPDM therefore, can be described as a new form of a vintage or old and well-established rubber polymer.

EPDM Liquid Rubber is a reliable durable product which can be trusted and with simple maintenance it can last for decades. This coating is weather resistant which means it can tolerate temperature ranging from 300 degrees F to -40 degrees F. Plan your rubber roof repair on a clear sunny day however; even if it rains do not worry because Liquid Rubber will not wash off.

Facts about Liquid Rubber

• One coat application.
• A true "Do-It-Yourself" product with over a 25 year history of success.
• 18-20 year life expectancy before re-coating.
• Lasts 4-times longer than ordinary roof coatings.
• Saves time, money and material costs.

To learn more about Liquid Rubber visit https://www.epdmcoatings.com/liquid-rubber.php and to stay on top of repairs visit https://www.epdmcoatings.com/blogs/2008/04/epdm-rubber-for-roof-repair/.

Does Rubber Roof Coatings really work…? Is their value exceeds expectations …?

The roof of the building whether commercial or residential is something expensive thing to repair. Buildings and in particular the roof requires regular maintenance to keep up their longevity. Preventive maintenance of the roof should be done on a regular basis as small issues can evolve into bigger problems later on.

The trouble usually starts at the top

The roof takes the toughest toll form mother nature’s destructive forces; it is usually where the trouble starts from. Gaps in roof structure or seams, water leakage and ponding, premature roof failure are the few issues that you need to work around.

Rubber Roof Coatings

You can easily prevent or fix most of the roof issues using rubber roof coating. Rubber roof coatings like EPDM Liquid Rubber helps to keep the roof in tip-top shape and extend the life by 18-20 years. EPDM rubber roof coating comes in liquid form which can be easily applied like a paint material. It’s one coat system when applies and properly cure creates a water tight seamless membrane not affected by ponding or UV-rays.

Is it worth it?

The answer is the absolute YES, no doubt in it. One can save thousands of dollars spend on expensive roof repairs by just applying one coat of EPDM Liquid Rubber. EPDM Liquid Rubber not only water proofs the roof, it blocks UV-rays and is not affected by water ponding.

How much do Rubber Roof Coatings cost?

Applying rubber roof coating is not an expense but an investment on the roof. How much this investment will cost depends upon the size of your roof. You need to measure the length and width of the roof to get the coverage area and then purchase the amount of product needed to cover that surface. All you need to do is look for an all-in-one product that doesn’t need a primer put on first and gives you total coverage in one coat e.g., EPDM Liquid Rubber.

For more information and material estimates visit, https://www.epdmcoatings.com/ and for cost and benefit analysis of rubber roof coatings visit, https://www.epdmcoatings.com/blogs/2019/12/worth-it-or-not-rubber-roof-coatings/

What you need to know before using Liquid Rubber Roof Sealant…?

EPDM’s coating Liquid Rubber sealant is a true EPDM product with one-coat product application system. Unlike other sealants there is no need to re-coat the surface area again and again. The liquid version of EPDM is similar to sheet EPDM, but as in liquid form you don’t need to worry about seams as it creates a seamless membrane.

Before you apply Liquid Rubber sealant there are some things you need to know first. Here they are:

• Add a catalyst before use. Scrape the sides of container or use a mixer drill so that the catalyst is properly mixed.
• Xylene or any other Solvents may be added to regulate viscosity or for clean-up.
• Liquid EPDM Rubber can be easily applied like a paint material using squeegees and nap rollers. The product is self-leveling.
• Product pot life is 4-6 hours after the catalyst has been added.
• Temperature plays an important role in curing the product. Higher the temperature, faster will be product curing.
• The coated surface should be cleaned and dry before application of Liquid Rubber; otherwise, it will not adhere properly to the surface.
• Liquid Rubber works perfectly on various roofing systems including metal, rubber, and fiberglass. However, for wood, it needs a primer coat before application.
• The chemical reaction of Liquid Rubber mixed with catalyst can be stopped by freezing the material. This makes the material usable for weeks or months. To use again simply unfreeze at room temperature and apply.

If you have more questions and queries, feel free to ask at, https://www.epdmcoatings.com/qa/questions for product preparation guidelines visit, https://www.epdmcoatings.com/blogs/2012/11/things-to-remember-when-using-liquid-rubber/

Top 5 advantages of using EPDM Rubber Roofs

If your business or home has a flat or low slopped roof, then you have many good options in terms of roofing materials than conventional options asphalt shingles, shakes, and the like. EPDM rubber roofing is one of the most popular options on the market currently and a lot to offer. EPDM offers a quite a few benefits and advantages as compared to other roofing materials and understanding these benefits is the key to make the right roofing decision.

No more leaks

A leak has the potential to damage the underlying structure of the roof, the electrical wiring and the ceiling. Leaks also create mold and mildew. But with EPDM rubber roof you can say no to leaks. EPDM roofing creates a seamless membrane which creates a barrier between the roof and the other elements like water and UV-rays.

No odor problems

Other roof coatings have an unpleasant smell that leaves a toxic tinge in the air. People don’t like smelling that. One of the nicer things to have with EPDM rubber roofs is that it does not have the nasty odor typically associated with coatings.

Works for all climates

EPDM rubber roofing is all season roofing material. It can withstand hot and cold temperature variations without becoming brittle or crack. In fact, it is one of the most durable materials on the market with useful life surpassing 50 years after correct installation.

Cost effective solution

EPDM rubber roofing is more affordable than many roofing systems on the market. The low cost per square foot allows you to save money which can be reinvested in other areas needing construction or re-roofing. As it can last for decades, it increases the cost efficiency.

Simple application

You don’t need to hire professionals to install EPDM roof. All you need is a set of useful handy tools and the will and time to do it all by yourself. It goes on easily like a paint material. However, you can hire professionals if you don’t have the inclination to do it on your own, but it makes for a great DIY project.

For everything you need to know about EPDM roofing visit, https://www.epdmcoatings.com/epdm.php and to further enrich your thoughts about benefits of EPDM roofing visit, https://www.epdmcoatings.com/blogs/2017/02/five-reasons-to-consider-using-an-epdm-rubber-roof/

Blog

A Beginner’s Guide to EPDM Rubber &How to Get the Best Out of it…!!

Whether you are re-roofing your business or home or creating a fishpond, EPDM should be the material of choice over ordinary materials. Also, Liquid Rubber which is actually EPDM in liquid form is also the best roof coating available on the market. EPDM rubber is easy to apply, water tight and when fully cure offer numerous benefits. However, there are things you’ll need to know to get the most out of this material.

EPDM Rubber Installation Tips

1. Use the right tools: You can apply EPDM rubber coating using rollers and sprayers. Rollers can be used to evenly spread EPDM rubber across the surfaces and use longer handles for easier application. Sprayers can be used for very large roofs and hard to reach areas where a roller or brush might not work smoothly.
2. One coat is enough: With EPDM rubber coating only one coat is enough. One coat of EPDM rubber is durable enough to withstand weathering and to look good. Too many coats can add excess weight to your roof and will also adversely affect curing time.
3. Waterproof: While ordinary coatings require some time to waterproof after application, EPDM Rubber coating water proofs the roof the moment it is applied, however, it will still take some time to cure properly depending upon the temperature and humidity in the air.

Extend the Lifespan

• Maintain it: Inspect your roof at least twice a year. Look for damaged areas and possible leaks. In case of minor repairs apply a new coat of EPDM rubber coating. In addition to visual inspections also remove dirt and debris from the roof because when it piles up on the roof can cause water to back up, and can even help foster mold and mildew growth.
• Flashing and Edging: Keep a close eye on flashing or edging. If these come loose or are damaged, it could lead to damage to the rubber coating. If there is need to replace edging or flashing, make sure that the membrane is turned down over the fascia with the metal cover installed over the top.

In Conclusion

EPDM Rubber coating is economical, incredibly durable, and readily available and can apply on wide varieties of applications both residential and commercial. The literature provided above will help you maximize the lifespan of your rubber application, and will help to get the most out of your EPDM rubber application.

If you are interested to learn about EPDM rubber visit,https://www.epdmcoatings.com/why-epdm.php

Don’t Let Corona Pandemic Deprive You of Getting the Biggest Benefits of EPDM Rubber Roofing…!!

As Corona Pandemic is creating havoc across the world, the roof industry is already facing effects and must embrace itself for the challenges to come. The roofing industry in particular has seen reduction in production of roofing materials as productions are halted. As corona pandemic continues to spread it is crucial for you to implement safety protocols designed to prevent the spread of the virus. Also, keep your home secure by using the best roofing materials like EPDM rubber roofing. EPDM stands for ethylene propylene diene monomer and it offers quite lot of benefits.

Strength and Durability

Everyone wants their roofing system stands up against Mother Nature destructive forces like storms, winds, rain, and snow. An extreme weather conditions will have their toll on the roofing system. EPDM roofing system is the most durable and reliable roofing system which can endure extreme temperature variations both hot and cold and it does so without becoming brittle or cracking and without compromising the structural integrity of the roof.

Great for All Climates and Locations

EPDM rubber roofing is available in both black and white colors. The white version is extremely useful in hot climates where it reflects the harmful sun and UV-rays. This can help to reduce the air conditioning needs and thereby reducing energy bills. Conversely, in cold climates the black color is the right choice. It absorbs the sunlight which helps to keep the building warmer, again reducing your energy bills.

Long Lasting

Thanks to the durability and strength of EPDM roofs, they can last for years. In fact EPDM roof can last for decades up to 30 years. But it is important that you install the EPDM roof by hiring professionals so that they are installed properly and also perform routine inspections and repairs when needed. The good thing is repairs are rare.

When it comes to maintenance of the roof it also does not require much. It involves cleaning the roof and performing repairs as soon as possible. Most repairs include tears and punctures or leaks all of which can be easily repaired using EPDM Coatings Liquid Rubber.

For detailed content on the benefits of EPDM rubber roofing visit https://www.epdmcoatings.com/blogs/2015/10/biggest-benefits-of-epdm-rubber-roofing/.

Don’t Let Covid-19 Pandemic Skip your Commercial Roof Maintenance & Application of EPDM Rubber Roof Coating…!!

A lot of hard work goes in maintaining a commercial roof and making it to function properly. Most building owners are unaware of how to keep their building in a god shape. Most commercial roofs are flat and are made up of rubberize roofing material known as EPDM. This roofing material can be maintained and protected by applying a roof coating. There are many roof coatings available on the market but EPDM Coating’s Liquid Rubber stands out from the crowd and is unique on all fronts. But before applying a roof coating there are some important considerations to made which are as follows:

Cleaning the Roof is Essential

Before applying EPDM rubber roof coating, the first step is to clean the roof from dirt, debris, oil residues and any other loose materials. The commercial roof over the time will accumulate dirt and mold, so it is wise to clean the rubber roof first before applying any roof coating. The roofing professionals hired have specialized equipment to clean the roof, by starting from one section of the roof and making their way towards the other end the roof can be cleaned in no time.

Repairing All Damage Present on the Roof

Before applying EPDM rubber roof coating, a thorough inspection should be done to determine the extent of damage done to the roof. Any tears, punctures and holes should be fixed first before applying the coating otherwise the coating will not adhere properly to the roof and both time and money invested will be wasted. Also if there are any ponding issues apply a liberal amount of sealant to fill in the dip that this type of condition causes.

Applying the Sealant

When all the prep work has been done, now it is time to apply the rubber roof coating. The professionals will start to work on one section at one time by applying a thick coat and making their way backwards to the other section. Also don’t do the honors of applying the coating yourself as you can do more harm than good. People who are hired are professionals and have the capacity and equipment to apply the coating. Hiring the right people for the job is very crucial, so before you hire any professional do a thorough background check on previous jobs undertaken and ask for references.

Covid-19 Trivia: “The roofing industry is settling into the “new normal” in a corona pandemic world. The manufacturer, suppliers and roofing contractors all have made changes to their procedures and operations but impact of the unprecedented developments around the world related to the COVID-19 crisis are still unknown, so stay put stay safe.”

For essential considerations of rubber roof coating visit https://www.epdmcoatings.com/blogs/2016/01/the-essentials-of-properly-applying-an-epdm-rubber-roof-coating/

COVID-19 and Adding Protection in the Form Of Roof Coating Like EPDM Liquid Rubber

Whether you have a flat roof or a low pitched roof, everyone wants to have added protection for their roof. The last thing you want to have is a roof leak. A leak can be damaging to the structure of the building as well as your belongings inside of the building. The best thing is to have added protection in the form of roof coating like EPDM Liquid Rubber.

The Application Process

First you have to prep the roof surface and clean the roof from dirt, debris and loose material. Cleaning the roof is essential otherwise the coating will not adhere properly to the roof. You can apply Liquid Rubber using a sprayer, just as you would with paint. This is good technique especially if you have to coat a larger area of the roof. You can also apply Liquid Rubber manually with rollers and even paintbrushes around tight areas, just as you apply regular paint material.

How Many Coats?

With ordinary coatings you may have to apply multiple coats but with Liquid Rubber one coat is enough most of the times and even without a primer. The single coat will provide you enough coverage without adding un-necessary weight to the roof. This will also help you to complete the roofing project rapidly as you don’t have to wait for the initial coat to dry and then apply the second coat.

Covid-19 Safety Alert: “Never ever risk your health and safety. Strictly follow the protocols recommended by WHO and CDC. If you are sick stay at home and follow the guidelines of your health care professional.”

Do You Need to Work With a Professional?    

One thing that concerns many people is whether one can apply liquid rubber on your own or there is a need to hire professionals. If you have the right tools and DIY inclination, you can surely apply Liquid Rubber on your own by following the manufacturer’s instructions and safety guidelines. It will take some time to have a steady hand but this is the route that most people take and save considerable money.

However, if you don’t have the time or the DIY inclination then it is always good to hire professionals. You can buy the material and let the roofer to care of the installation.

Along with the benefit of protecting from rain, you can also have multiple benefits by using Liquid Rubber such as controlling the building temperature. The white coating of liquid rubber reflects the harmful UV-rays and thus keeps the building cooler and if you live in areas whether is cold you can use the black version of EPDM Liquid Rubber which absorbs sun light and make the building warmer in cold weather.

More from experts can be seen at to https://www.epdmcoatings.com/blogs/2018/06/tips-for-applying-a-liquid-rubber-roof/.

Similar to sheet EPDM, EPDM Liquid Rubber waterproof sealant is essentially EPDM but in liquid form. The liquid rubber waterproof coating is a synthetic polymer made from combining ethylene, propylene, with a diene monomer attached. The only difference between two is that the liquid coating uses a lower molecular weight polymer.

The advantage of liquid EPDM is that unlike sheet EPDM liquid EPDM eliminates the problem of leaks happening at the seams, as well as versatile enough that it can be applied to virtually any surface shape, including flashings, and protrusions. There are a number of waterproof coatings available on the market like as acrylic, elastomeric and urethane and each of these coatings has its own application process, as well as pros & cons.

Benefits of installing liquid EPDM

• Extends the service life of an existing roofing system for up to 20 years.
• Can be used to repair leaks and punctures.
• So Versatile as it can be applied to any type of flashing, protrusion, or roof shape.
• Waterproofs directly upon application and not affected by water ponding.
• Exceptional chemical resistance to concentrated salt solutions, various acids, alcohols, ketones and strong alkali’s.
• Exceptional weather resistance.
• Can handle temperature fluctuations easily.
• Can be applied to wide range of roofs.
• Lasts 4 times longer than ordinary liquid rubber coatings.
• Costs up to 50% less than other systems that require primers and multiple coats.
• Can be applied on both commercial and residential properties as well.
• Requires ONLY one coat, and does not require primer on most surfaces.

Application

Here is what you will need:

• Electric drill
• A mixer for a can or pail.
• A rubber squeegee attached to a broom handle.
• One Short nap roller approx. 1/4” attached to a broom handle.
• Paint brush
• Rubber spatula
• Mineral spirits or Xylene for clean up
• Bag of Rags

Installation

You can apply liquid rubber using a squeegee to cover the roof area and a short nap roller to evenly spread the material. Once applied liquid rubber will be somewhat tacky for 12 hours. It waterproofs the roof directly upon application however, it will take some time to fully cure but you will be able to walk on the roof/surface within three days. Assuming temperatures are above 70° a full cure can be expected in 5 to 10 days. Higher temperatures will decrease the curing time and lower temperatures will increase the time. If the temperature falls below 55° take that into account.

Coverage

When determining your overall square footage be sure to measure the true area. Let’s for example, assume that you have a metal corrugated roof. You need to look at the square footage of the raised areas of the roof and add that to your total square footage. If this is your first time applying Liquid Rubber EPDM, we suggest you chalk your roof off into either 42 sq. ft. or 210 sq. ft. sections. When you are done filling in the area you should be done with either that gallon or five gallon pail. This is how you know you are applying it at the recommended spread rate.

What is the Spread Rate?

The ideal thickness is 20 mil. of dry film, which can be spread to 42 square feet per gallon onto area.

When assuming a 45 square foot gallon, the specs are:

• 8 pounds per mixed gallon
• 680 psi tensile
• 62° F brittle point
• 180-200% elongation

What is the Cure Rate?

The curing of EPDM Liquid Rubber depends wholly on temperature and oxygen availability. Oxygen is required in order to activate the catalyst. Temperatures vary considerably in some regions, and it may take several weeks for a full cure to take place if EPDM Liquid Rubber is applied during a cool season. However, don’t worry even in a non-cured state, it will withstand water and rainfall.

EPDM Liquid Rubber vs. The Competition

Need a professional guide to how to mix and apply liquid rubber visit https://www.epdmcoatings.com/application.php and for detailed usage of liquid rubber visit https://www.epdmcoatings.com/liquid-rubber.php.